The disk threshold was unreliable on hosts with separate /home or /var
mounts where df underreports free space. Simplify the pre-flight to a
RAM-only check.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
NanoClaw is known to not run reliably on GCE instances. Detect via DMI
during pre-flight (between the spec check and root warning) and let the
user abort before sinking time into bootstrap.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Pre-flight check in nanoclaw.sh that detects available RAM and free disk
on the project-root partition (Linux + macOS) before the bootstrap
spinner runs. Below 3700 MB RAM or 20 GB free disk, surfaces a "likely
cannot run" warning with a Try-anyway prompt defaulting to abort. The
3700 MB floor sits below 4 GB because "4 GB" VMs typically report
3700–3900 MB after kernel reserves (Hetzner CX21 ≈ 3814, AWS t3.medium
≈ 3800). Cheaper to fail here than to wait through pnpm install on a
host that can't run the agent container. Diagnostic events fire on
continue/abort.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Replaces the single-line `NanoClaw` wordmark printed by
nanoclaw.sh with a multi-line splash frame: the lobster mascot
rendered as truecolor braille, drifting bubbles on either side,
the figlet wordmark below (Nano in bold, Claw in cyan bold),
three taglines — "Small.", "Runs on your machine.", "Yours to
modify." — and a navy seafloor line.
The frame is pre-rendered into `assets/setup-splash.txt` (built
from `assets/nanoclaw-icon.png` via chafa for the lobster +
figlet for the wordmark). nanoclaw.sh just streams the literal
bytes — no runtime dependency on chafa, figlet, or
ImageMagick.
Total height: 30 lines. Visible width: ~40 columns (fits any
terminal). Truecolor ANSI codes are used directly; terminals
without truecolor support will see a degraded but still
readable frame.
Also removes the standalone "Small. Runs on your machine.
Yours to modify." tagline line that nanoclaw.sh used to print
above the bootstrap spinner — those taglines now appear inside
the splash, so showing them again would duplicate.
The wordmark-suppression flow downstream (`setup:auto` honoring
`NANOCLAW_BOOTSTRAPPED=1`) is unchanged: the splash prints once
in nanoclaw.sh, setup:auto's `printIntro()` sees the flag and
keeps the clack `p.intro` line clean ("Let's get you set up.").
Setup steps like install-node.sh and install-docker.sh run sudo
non-interactively. Without NOPASSWD, password prompts can silently
hang when piped through the setup runner.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Users running setup as root hit permission issues with containers,
services, and file ownership. Warn early with an interactive prompt
and provide step-by-step instructions to create a regular user.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Adds a single config registry that drives both CLI flags and an opt-in
advanced-settings screen, so power users can override defaults like
remote OneCLI host/token or alt Anthropic endpoints without burdening
the standard linear flow with extra prompts.
Why: advanced configurations didn't fit cleanly into the existing
sequenced setup. PR #2030 took the "add another prompt step" route for
remote OneCLI; this approach instead routes those overrides through a
single source of truth so adding the next knob (alt endpoint, custom
host pattern, …) doesn't mean another prompt-or-skip decision.
setup/lib/setup-config.ts — schema (typed entry list with surface
'flag' | 'flag+ui'), name derivation (camelCase → NANOCLAW_UPPER_SNAKE
+ --kebab-case), seeded with --onecli-api-host, --onecli-api-token,
--anthropic-base-url, plus existing NANOCLAW_SKIP / NANOCLAW_DISPLAY_NAME
as flag-only entries.
setup/lib/setup-config-parse.ts — argv parser (--key value, --key=value,
--no-bool, -- terminator), env reader, applyToEnv() bridge that writes
resolved values back to process.env so existing step code keeps reading
env vars unchanged. Also --help printer.
setup/lib/setup-config-screen.ts — interactive menu loop. Entries
render with current value as hint; selecting one opens the right prompt
type (text / password for secrets / confirm / brightSelect for enums);
"Done" returns to the main flow.
setup/auto.ts — parses argv first (--help short-circuits before any
render), folds env+flags into process.env, then offers a welcome menu:
"Standard setup" (default) vs "Advanced". The onecli step branches on
NANOCLAW_ONECLI_API_HOST: if set, skips the local-vs-fresh prompt
entirely, runs pollHealth pre-flight, then calls runQuietStep with
--remote-url. Token, when provided, writes through to ONECLI_API_KEY in
.env. Welcome copy tightened (drops the duplicate wordmark/tagline) so
the bash → clack handoff reads as one flow.
setup/onecli.ts — cherries the --remote-url implementation from PR
run()) and generalizes writeEnvOnecliUrl into a writeEnvVar helper so
ONECLI_API_KEY follows the same upsert path.
nanoclaw.sh — forwards "$@" to setup:auto so flags reach the parser;
trims the redundant "Setting up your personal AI assistant" subtitle
and the bootstrap teach line so the pre-clack section isn't competing
with the clack intro for the same role.
Token plumbing only fires in --remote-url mode; local installs are
unauthenticated against localhost and don't need it.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
When corepack enable fails with EACCES (common when Node is installed to a system-writable prefix like /usr/local that the user doesn't own), we fall back to `npm install -g pnpm`. But npm's global prefix isn't always on the shell's PATH — users often set `npm config set prefix ~/.npm-global` to avoid sudo, and the resulting bin dir isn't picked up by `command -v`. Install succeeded, but pnpm "wasn't there" for the follow-up `pnpm install`.
Now after the npm fallback we query `npm config get prefix` and prepend `<prefix>/bin` to PATH. Mirror the same lookup in nanoclaw.sh right before `exec pnpm run setup:auto` — setup.sh's PATH mutation doesn't propagate back, and the hand-off needs pnpm visible too.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Shared bash + node emitter in setup/lib/diagnostics.{sh,ts} reads/writes data/install-id so every event from a single install shares one distinct_id — bash-side setup_launched/setup_start, node-side auto_started, per-step started/completed, auth_method_chosen, channel_chosen, first_chat_ready/failed, setup_incomplete, setup_aborted, setup_completed. Opt-out via NANOCLAW_NO_DIAGNOSTICS=1.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Major version for the v2 rewrite. CHANGELOG documents the breaking
changes users will hit on upgrade: new entity model, two-DB session
split, `bash nanoclaw.sh` as default install, channels/providers
relocated to sibling branches, three-level isolation, Apple Container
removed from default setup.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
install-node.sh and install-docker.sh both require brew on macOS. On a
fresh Mac there's no brew, so the bootstrap spinner would bail with a
cryptic "Homebrew not installed" error. Move the prompt to nanoclaw.sh
as a pre-flight, so the user sees a clear ask — including the heads-up
that Xcode Command Line Tools come along for the ride (~5-10 min) —
before the spinner starts and brew's own sudo/CLT prompts appear.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Content pass: every user-facing line is rewritten from the perspective
of someone trying NanoClaw for the first time. Phase labels and devops
framing are gone. Examples:
"Environment OK" → "Your system looks good."
"Container image ready" → "Sandbox ready."
"OneCLI installed" → "OneCLI vault ready."
"Anthropic credential" → "Claude account"
"Mount allowlist in place" → "Access rules set."
"Service installed/running" → "NanoClaw is running."
"Wiring the terminal agent" → "Setting up your terminal chat…"
"Setup complete" → "You're ready! Enjoy NanoClaw."
Long-running steps get a one-sentence "why" that teaches a NanoClaw
differentiator while the user waits:
bootstrap → "NanoClaw is small and runs entirely on your machine.
Yours to modify."
container → "Your assistant lives in its own sandbox. It can only
see what you explicitly share."
onecli → "Your assistant never gets your API keys directly. The
vault adds them to approved requests as they leave the
sandbox."
OneCLI is now named explicitly and framed as "your agent's vault" in
the install step, the paste-auth save step, the subscription-auth
banner, and their associated failure hints.
Auth split (option b: explicit step name on fail): the auth-method
choice moves from the bash menu in register-claude-token.sh into a
clack select. Only the subscription path still breaks out to the
interactive TTY for `claude setup-token`; paste-based OAuth tokens and
API keys stay in clack via p.password() and register directly via
`onecli secrets create`. register-claude-token.sh is scoped down to
the subscription flow only.
nanoclaw.sh: dropped the "Phase 1 / Phase 2" labels. The wordmark and
subtitle now print bash-side so setup:auto skips repeating them and
the flow reads as one continuous sequence. Bootstrap label is
"Installing the basics" with a dim gutter-line "why" preamble. pnpm's
`> nanoclaw@X setup:auto` preamble is suppressed via --silent.
Em-dash pass on user-facing copy: every em-dash that functions as an
em-dash in a user-visible string is replaced with period, semicolon,
comma, or parens. Code comments and JSDoc are untouched.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Documents and implements the output contract from docs/setup-flow.md:
Level 1: clack UI — branded, concise, product content
Level 2: logs/setup.log — append-only, linear, structured entries for
humans + AI agents reviewing a run
Level 3: logs/setup-steps/NN-name.log — full raw stdout+stderr per step
Every scripted sub-step, including bootstrap, emits at all three levels.
Bootstrap now runs under a bash-side clack-alike spinner with live elapsed
time; its apt/pnpm output is captured to 01-bootstrap.log and summarised
as a progression entry. setup.sh's legacy log() routes to the raw log
instead of contaminating the progression log.
Telegram install becomes fully branded: setup/auto.ts owns the BotFather
instructions (clack note), token paste (clack password with format
validation), and getMe check (clack spinner). add-telegram.sh drops to a
non-interactive installer that reads TELEGRAM_BOT_TOKEN from env, logs to
stderr, and emits a single ADD_TELEGRAM status block on stdout.
The Anthropic credential flow is the one intentional break — register-
claude-token.sh still inherits the TTY for claude setup-token's browser
dance; it logs as an 'interactive' progression entry with the method.
setup/logs.ts centralises the level 2/3 formatting: reset, header, step,
userInput, complete, abort, stepRawLog. User answers (display name, agent
name, channel choice, telegram_token preview) log as their own entries so
the setup path is reconstructable from the progression log alone.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
After cli-agent, prompt the user to connect a messaging app. For now
only Telegram is offered; "skip" falls through to the existing CLI
flow.
setup/add-telegram.sh runs the scriptable half of /add-telegram: fetch
the channels branch, copy the adapter + pair-telegram files, append
the self-registration import, install @chat-adapter/telegram@4.26.0
(pinned to match the skill), rebuild, collect TELEGRAM_BOT_TOKEN via
silent paste, write .env + data/env/env, and kick the service so the
new adapter is live. Idempotent throughout.
setup:auto then runs the existing `pair-telegram` step with
--intent main. The step emits the 4-digit code in its status stream,
which is already forwarded to stdout by runStep.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The timezone step blocked the scripted flow on headless servers where
the resolved TZ was UTC (interactive /setup confirms, setup:auto had
to bail). Drop it from the chain — host TZ defaults to whatever the
OS reports. Users who need an explicit override run the step on
demand: `pnpm exec tsx setup/index.ts --step timezone -- --tz <zone>`.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Single command end-to-end: `bash nanoclaw.sh` runs setup.sh for
bootstrap and hands off to `pnpm run setup:auto` on success. Passes
through NANOCLAW_TZ, NANOCLAW_SKIP, SECRET_NAME, HOST_PATTERN via env.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
